Rear Panel; Remote Control - Strong SRT 40FX4003 User Manual

English
1. Power indicator /remote sensor
2. Standby button
3. Speakers

2.3 Rear panel

noTE:
1. HDMI1 (MHL):
2. SERVICE onLY: Service port.
3. SCART:
4. AnTEnnA (AIR/CAbLE/Lnb) In:
5. CI+:
6. USb1:
:
7.

2.4 Remote control

1. q
2.
3. PICTURE
4. SoUnD
5. ZooM
6. SUbTITLE
7. EPG
8. fAV
9. 0 ~ 9
10. CHn LIST
11. RETURn
12. MEnU
13. SoURCE
14. pqt u
15. EnTER
16. TV/RADIo
17. EXIT
18. HoME
19. VoL +/-
20. PR +/-
21. 4
22. SLEEP
23. Info
24. t 2
The graphics are for representation only.
Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console. HDMI1 port supports MHL function.
Connect devices like DVD or VCR using SCART cable.
Connect an antenna, cable, satellite dish to the TV for searching and receiving
programmes.
Connect a Conditional Access Module (CAM).
USB port.
Headphone or Earphone audio output, speakers will be muted when
earphone is plugged in and headphone selected.
Press to turn the TV on or standby.
Press to mute or restore the volume.
Change picture mode.
Change sound mode.
Change aspect ratio.
Enable/disable subtitles in DTV/USB mode.
Press to display the current EPG information in DTV mode.
Press to view your assigned favourite channels. Press pq to cycle through
your assigned favourite channels, press EnTER to confirm.
Choose channel directly.
Press to enter into the channel list.
Press to back to previous viewed channel.
Open the menu options.
Select the input source mode.
Navigate the menu.
Confirm the selection.
Switch between TV and radio.
Exit the current menu.
Enter the home desktop. If your TV doesn't have HOME function, this button
will not work.
Adjust the volume up or down.
Change programmes up or down.
Press to record the current programme (only working in DTV mode).
Select the sleep time, such as10 min, 20 min etc.
Display information about the current source.
Press to pause playback, press again to continue playback.
Fig. 3
Fig. 4
5