Channel Settings - Strong SRT 40FX4003 User Manual

necessary under normal conditions. However, in area of inferior broadcast conditions where adjustments
is necessary for a better picture and sound, use fine-tune. Select a channel that you want to fine tune. In
the Channel menu, select ATV Manual Tuning and press q to highlight Fine-Tune. Press t u to fine tune
until the best possible picture and sound are obtained.

5.4.5 Channel settings

Programme Edit
Signal Information
Cl information
5 V Antenna Power
Software Update (OAD)
OAD Tuning
* Only for some regions.
5.4.6 options
OSD Language
Audio Languages/Subtitle Languages
TTX Language
Time
HDMI CEC
PVR File System
Factory Reset
SW Version
Software Update (USB)
note:
Audio Languages, Subtitle languages and PVR File System only works under DVB-S/DVB-C/
„ „
DVB-T mode.
User data on this TV will be completely lost after operating this feature.
„ „
Do not power off the TV during the software upgrading process, otherwise the TV may not
„ „
work, and STRONG does not assume liability.
12
Edit the programmes. You can press the CoLoUR bUTTonS on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing fAV.
Showing the information of current DTV channel.
Enables the user to select from the CAM-provided menu. Select the Cl menu
based on the menu PC card.
This option is only available in DVB-T source, select On to supply power for
the TV's antenna. Select Off to turn off this function.
Select On to allow the TV to update the system software over the air. Select
Off will turn off this function.*
When software update (OAD) is off, this option is disabled. By selecting OAD
scan you can scan channels to find the OAD update information.*
Select the OSD language.
Select as you prefer.
Select TTX Ianguage for different regions.
Can setup Auto Sync, Clock, Time Zone, Summer Time, Sleep Timer and Auto
Sleep.
Press to enter into submenus.
HDMI CEC: Turn on or off HDMI CEC function.
Auto Standby: Turn the TV to standby automatically.
Device List: When HDMI CEC is ON, you can check the list of connected
devices.
Personal Video Record setting. This function only works when receiving a
digital TV programme and when a USB disk is connected.
Restore user setting to the default.
Displays the current software version and the model name
Connect a USB device with upgrading software to upgrade the TV system.
English