Timer Recording; Electronic Programme Guide (Epg) - Strong SRT 40FX4003 User Manual

English
On some encrypted channels (using CI+ module) the recording mode is blocked by the
„ „
broadcaster

4.2 Timer recording

Go to the channel that will broadcast the programme you want to record. Press EPG on your remote
control to bring up the EPG interface. The channel you are watching will be highlighted on the screen
that appears. Press the RED button on the remote control, then enter into the programme details on
the recorder menu by pressing pq to select an item and t u to change the setting. For example, if
the programme starts at 8:30 pm on the same day, enter 30 in the space for MINUTES, 20 in the space
for HOURS (a 24 hour clock applies) and then the relevant date. Use the same method for entering the
finish time. Choose the recording mode: Once, Daily or Weekly. Press EnTER to confirm your selection. A
schedule of all your recordings (the schedule list) will appear. See chapter 4.3.3 for more on the schedule.
The recording will be active also in Standby mode.
noTE:
If you are browsing the EPG, follow the steps on the EPG function page.

4.3 Electronic Programme Guide (EPG)

EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and
offers information on broadcasted programmes. You can access it in digital mode by pressing EPG on
the remote control. Press EPG to bring up the EPG interface. The second bar from the top will display
the current date and time. On the list below, the channel you are currently watching will be highlighted.
Before you can view any EPG information, you have to 'activate' every channel for which you want to
view programme information. To do this, use pq to select a channel, then press EnTER to confirm.
To check programmes which will be broadcasted on a future date, scroll up to the date field with p. Use
u to select the date you want to check. Press t 2 to scroll up to the top bar in the display, then press
t u to select the Channel List. The second bar will then display one of your available channels. Go to
the channel for which you want to view information using t u. After a brief moment, the programme
information will appear. Use pq to scroll through the time slots. Press MEnU to exit the EPG menu.
4.3.1 Recorder from the EPG
Go to the channel that will broadcast the programme you want to record. Press EPG on your remote
control to bring up the EPG interface. The channel you are watching will be highlighted on the
appearing screen. Press InDEX to reach the top bar in the display and then use t u to display the whole
programme list of that channel. Select with pq the programme you want to record and then press the
RED button to display the recorder menu already set. To confirm the record press EnTER. An updated
schedule list will be shown. See detailed information about the different ways of recording with the
television onto a USB device.
4.3.2 Info
Press the GREEn button to show information about the selected programme.
4.3.3 Schedule
Press the YELLoW button to display the Schedule List. Press pq to select an event, press the RED button
to delete an event.
A recording is possible only if a USB device is connected.
9