Verifying The Installation - IBM Advanced SerialRAID/X Installation Manual

|
7. A screen showing a list of all detected storage drivers will appear. Insert your SSA
|
|
|
| 8. The system will scan the disk and copy the SSA drivers to the system. It will then
|
|
|
|
9. You will be returned to the Driver Summary screen. In the Options menu at the
|
| 10. Continue with the operating system installation according to the manufacturers
|
|
11. When the server has restarted enter at the system console:
|
|
| 12. This will modify the autoexec.ncf with two lines that load additional SSA nlms.
|
|
|
You should now verify that the installation of the software has been completed
| successfully. "Verifying the Installation" describe this process.

Verifying the Installation

|
| When the adapter, the device drivers, and the configuration utilities have been installed
|
you can verify successful installation with the following procedure:
|
1. Restart the server. At the system console type:
|
|
|
|
|
|
2. At the console enter:
|
|
|
24
IBM Advanced SerialRAID/X Adapter: Installation Guide
driver disk and press Ins to Add an unlisted driver. You will be asked for the path
to your new drivers. The default is a:\. (You may change this if necessary by
pressing F3.) Press Enter.
present a menu of all currently selected storage drivers. In the Additional Driver
Options menu at the bottom of the screen, select Return to driver summary and
press Enter.
bottom of the screen select Continue and press Enter.
instructions. When this is completed you will be asked to restart the server. Do so.
load c:\nwserver\issainst
and then press Enter
When this has completed restart the server to implement the changes to the
system startup files.
down
and press Enter.
When the server is down and back at the DOS prompt, type:
server
This will start the server again and run all of your startup files.
modules issa*
The screen will show all the currently loaded issa files. Verify that the following files
have been loaded: