IBM Advanced SerialRAID/X Installation Manual page 34

Installing the Device Driver
|
|
Note: It is assumed that you have NetWare 5 installed and running on your system
|
|
|
|
This section describes how to install the device drivers. You must have either
| downloaded an updated NetWare device driver from the SSA World Wide Web Support
|
page (http://www.hursley.ibm.com/ssa/), or have the diskette labeled Novell NetWare
| 5 Device Drivers that is provided with your adapter.
|
The following steps describe how to install the device drivers:
|
1. From the console of your NetWare 5 server load the install utility by entering load
|
| 2. Select Driver options and press Enter
|
3. From the Driver options submenu select Configure disk and storage device
|
|
4. From the Additional driver actions menu choose Select an additional driver
|
|
5. The Select a driver: menu will be displayed. Press the Insert button to Install an
|
|
6. Put the NetWare driver diskette into the drive and press Enter. The system will
|
|
|
7. Select ISSAV4E0.HAM and press Enter.
|
8. You will be asked if you want to copy the driver ISSAV4E0.HAM. Select Yes and
|
| 9. You will now be asked to specify the server boot path. The default is
|
|
| 10. When the files have been copied the Driver ISSAV4E0 Parameter Actions menu
|
|
11. Enter the Slot Number and press Enter.
|
12. Press F10 to Save parameter settings.
|
13. Now select Save parameters and load driver from the menu and press Enter.
|
| 14. You will be asked if you want to select an additional disk driver. Select No and
|
|
15. At the Additional driver actions menu select Return to the previous menu and
|
| 16. At the Driver options menu select Return to the previous menu and press
|
|
17. At the Configuration Options menu select Exit and press Enter. Confirm exit
|
22
IBM Advanced SerialRAID/X Adapter: Installation Guide
unit, and that you have already installed the IBM Advanced SerialRAID/X
Adapter in the system unit. It is also assumed that the latest service packs are
applied to the system.
nwconfig.
drivers and press Enter
and press Enter.
unlisted driver.
scan the diskette, present you with a menu of device drivers, and ask you to
Select a driver to install.
press Enter.
C:\NWSERVER. Type in the path to SERVER.EXE if it is different to the default.
Press Enter to copy the relevant files to the server.
is displayed. Choose Select/Modify driver parameters and press Enter.
The driver will be loaded.
press Enter.
press Enter.
Enter.
from the utility by selecting Yes and press Enter.