IBM Advanced SerialRAID/X Installation Manual page 37

Table of Contents

3. At the console, enter:

Note: We recommend that the latest service packs are applied to the system.

ISSAV4E0.HAM

ISSAINJ.NLM

ISSAELOG.NLM

This test will show that the files have been successfully loaded into memory.

load c:\nwserver\issacfg.nlm

and then press Enter to load the ISSA configuration utility. Once it has started,

select SSA Adapter List from the main menu and press Enter. You will see a

display giving an entry for each SSA adapter installed in your system unit.

Select one of the adapters listed and the configuration utility will show all the

resources available to that adapter.

Chapter 4. Installing the Device Driver Software and Microcode

Table of Contents