Frame Inspection - Argon 18 E-117 TRI+ Assembly Manual

E-117 TRI+: 6. Frame Inspection
Before assemBling your new e-117 Tri+, make sure ThaT you have all The following:
1. Brakes and gears cables and housing set
2: Frameset parts checklist (see p.27)
3: Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
4: For reference, check serial number and write it on p.1
5: All the necessary bolts (refer to Frameset Parts, p.4)
6: For optimal shifting performance, use a dropout alignment gauge to make sure that the drive-side dropout is
straight.
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts according to their
torque specifications.
Parts installed on the frame
1 Front derailleur hanger
2 Rear derailleur hanger
3 Bottle cage
4 Bottom bracket cover
Description
Screw (2)
Screw (2)
Screw (7)
Screw (2)
Screw Torque Detail
type Nm
5mm 4Nm Loctite
3mm 4Nm Loctite
4mm 3Nm Grease
4mm 2.5Nm Grease
9