Table of Contents
Advertisement
E-117 TRI+: 4. Seat Post Clamp Installation
5.5 Nm
GREASE
THREADLOCKER
BLUE (n. 242)
1. Place the seat clamp wedge inside
the frame.
1.4
GREASE
2. Insert the seatpost (3.1) on which
some carbon fiber assembly paste has
GREASE
been applied.
3. Position the seatpost to the desired
LOCTITE
height.
4. Apply a drop of blue Threadlocker
1Nm
(n. 242) on the bolt's thread
CARBON FIBER
ASSEMBLY
5. Tighten the set screw at max. 5.5Nm
COMPOSITE
while leaving a space between the two
parts allowing them to slide.
IMPORTANT : The E-117 Tri+'s seat
clamp is not the same as the Nitrogen
6
Hide quick links:
Advertisement
Table of Contents
