Christie Presenter; Connect To The Projector - Christie DHD600-G User Manual

4.10

Christie Presenter

The Christie Presenter application allows a remote desktop from a host PC
to be displayed on the network display through Ethernet, USB, or wireless
transports. It can adapt to different network settings (DHCP, fixed IP, and
direct link by USB/Ethernet cable).
Christie Presenter can be downloaded from the Christie website or from the
web page of the projector.

4.10.1 Connect to the Projector

1. Connect to the projector using WiFi or Ethernet
- Ethernet connection:
`
`
`
- WiFi Wireless connection:
`
G Series User Manual
020-000648-01 Rev. 3 (02-2014)
Determine the projector's IP address from the menu Main Menu >
Configuration > Communications > LAN
Configure your PC IP address to be on the same network as the
projector.
The projector and computer must be connected directly or over the
network via Ethernet.
Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on
the projector input panel.
Insert the WiFi USB dongle
Section 4: Operation
4-29