Vega VEGAFLEX 61 Operating Instructions Manual page 31

Reset
Optional settings
VEGAFLEX 61 • Profibus PA
6 Set up with the indicating and adjustment module PLICSCOM
Basic adjustment
If the function "Reset" is carried out, the sensor resets the values of the
following menu items to the reset values (see chart):
The following values will be reset:
Function
Max. adjustment
Min. adjustment
Min. adjustment - Cable version
Damping ti
Linearisation
Sensor-TAG
Display
Channel (PV)
Additional PA value (PV)
Out-Scale-Unit
PV-Out-Scale
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function
Sensor address
Language
Factory setting
Like basic adjustment, in addition, special parameters are reset to
3)
default values.
Pointer
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
2) Sensor-specific basic adjustment.
3)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
2)
Reset value
Distance, upper dead zone
Distance, supplied sensor length
Distance, lower dead zone
0 s
linear
Sensor
PA-Out 1
lin %
lin %
%
0.00 lin % = 0.0 %
100.0 lin % = 100 %
Reset value
No reset
No reset
31