Hole Punch Mode - Toshiba e-STUDIO557 Copying Manual

3.BASIC COPY MODES

Hole punch mode

You can punch copied paper when the Hole Punch Unit (optional) is installed on the Finisher.
Paper whose size is any of A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R and COMP, and
whose weight is 64 to 256 g/m
Special paper such as OHP film or sticker labels is not applicable.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Place the original(s).
3
Press [FINISHING] on the touch panel.
4
Select [HOLE PUNCH], and then press [OK].
5
Select other copy modes as required, and then press the [START] button on the control
panel.
2
(17 lb. Bond to 140 lb. Index) is available.
3 BASIC COPY MODES
Selecting Finishing Mode 71