Toshiba e-STUDIO557 Copying Manual page 14

1 BEFORE USING EQUIPMENT
Feeder
Bypass tray Plain paper
(64 - 80 g/m
(17 - 20 lb. Bond)
THICK 1
(81 - 105 g/m
(21 - 28 lb. Bond)
THICK 2
(106 - 163 g/m
(29 lb. Bond - 90 lb.
Index)
THICK 3
(164 - 209 g/m
(91 - 110 lb. Index)
Tracing paper
(75 g/m
(20 lb. Bond)
Sticker labels
Tab paper
OHP film
*1 Duplex copying is not available.
*2 Tab paper can be set in any drawer other than the External Large Capacity Feeder (optional) or the bypass tray (the 2nd drawer
recommended).
*3 When a finisher (optional) is installed in the equipment, use 5 or 8-tab paper.
*4 Paper misfeeds may occur depending on the paper characteristics and its condition.
*5 For making copies on the tracing paper, select "PLAIN" for the paper type.
*6 For making copies on the sticker labels, select "THICK 3" for the paper type. Only Toshiba-recommended sticker labels should be
used.
*7 If a copy is made on either A6-R or non-standard size paper with a width of less than 182 mm (7.2"), or on paper of an unregistered
size, the paper exits with its copied side up.
"LT format" is the standard size only for use in North America.
"K format" is a Chinese standard size.
Abbreviations for paper sizes: LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer, SQ:
Square
12 Placing Paper
Paper type Maximum sheet capacity
100 sheets
2
)
80 sheets
2
)
40 sheets
2
)
30 sheets
2
)
—
*1, *5
2
)
—
*1, *6
—
*1, *2, *3
30 sheets
*1
Size
A/B format:
A3, A4, A4-R, A5-R, A6-R
B4, B5, B5-R, FOLIO
LT format:
LD, LG, LT, LT-R, ST-R,
COMP, 13"LG, 8.5"SQ
K format:
8K, 16K, 16K-R
Non-standard size:
Length: 100 - 297 mm (3.9" -
11.7"),
Width: 148 - 432 mm (5.8" -
*7
17")
A4, LT
A4, LT
*7
,