Copying Mixed-Size Originals In One Operation - Toshiba e-STUDIO557 Copying Manual

3 BASIC COPY MODES

Copying mixed-size originals in one operation

You can copy a set of originals whose sizes are individually different, using the RADF (Reversing Automatic
Document Feeder).
The original sizes that can be mixed are as follows:
North America: LD, LG, LT, LT-R, COMP
Other than North America: A3, A4, A4-R, B4, B5, FOLIO
1
Place paper in the drawer(s).
The bypass tray cannot be used. Use the drawers.
2
Adjust the side guides to the widest original, and then align the originals against the
side guide on the front side.
When original widths are the same
When copying originals of different widths, the copied image of the smaller one may be skewed
because it does not touch the side guide on the rear side.
3
Press [ZOOM] on the touch panel.
52 Paper Selection
When original widths are not the same