Hole Punch Mode (Optional) - Toshiba E-studio 352 Operator's Manual

3.Selecting Finishing Modes (Cont.)

Hole punch mode (optional)

When the Hole Punch Unit (optional) is installed to the finisher (optional), you can punch holes in the cop-
ies.
• The available copy paper sizes for this mode are A3, A4, A4-R, B4, B5, B5-R and FOLIO.
• The paper weight applicable for this mode is 64 to 209 g/m
• Special paper such as OHP films or sticker label cannot be used for hole punching.
1
Place paper in the drawer(s).
3
• When using this mode in bypass copying, specify the paper size in advance. (
2
Place the original(s).
3
Press the finisher button on the basic menu.
4
Press the [HOLE PUNCH] button.
• Set other copy modes as required.
5
Press the [START] button.
110
3.SETTING OF BASIC COPY MODES
2
.
P.75 "3.Bypass Copying")