Selecting Exit Tray - Toshiba e-STUDIO557 Copying Manual

2.HOW TO MAKE COPIES

Selecting exit tray

You can select the exit tray if an optional finisher is installed.
The available exit tray may be restricted depending on copy modes and paper sizes.
Exit tray selection is set at automatic selection by default.
Changing the exit tray
The exit tray currently selected is displayed on the equipment status indication area. To change the exit tray,
press [EXIT TRAY]. Every time you press this, the display changes from each tray of the finisher and
automatic selection.
2 HOW TO MAKE COPIES
Exit tray auto-selection
indication
Current exit tray
[ EXIT TRAY ] button
Making Copies 37