Using The Radf (Reversing Automatic Document Feeder) - Toshiba e-STUDIO557 Copying Manual

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO557:
Table of Contents

Advertisement

2.HOW TO MAKE COPIES

Using the RADF (Reversing Automatic Document Feeder)

Precautions
Do not use the types of originals 1 to 9 shown below because such originals may cause misfeeding or
damage to the equipment.
1. Badly wrinkled, folded or curled originals
2. Originals with carbon paper
3. Taped, pasted or cut-out originals
4. Originals with multiple perforations such as loose leaf paper
5. Clipped or stapled originals
6. Originals with holes or tears
7. Damp originals
8. OHP films or tracing paper
9. Coated paper (with wax, etc.)
Use the types of originals 10 and 11 shown below with extra care.
10.Originals which resist sliding with the fingers, or surface-treated originals (The sheets of such originals
may not be separated.)
11. Folded or curled originals (They should be fully smoothed out before being used.)
1
5
8
When black streaks appear
If the scanning area or the guide area is dirty, image trouble such as black streaks may occur on printouts.
Weekly cleaning of these areas is recommended. For cleaning, refer to the Quick Start Guide.
2
3
6
9
10
2 HOW TO MAKE COPIES
4
7
11
Placing Originals
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio857E-studio657E-studio757

Table of Contents