3 BASIC COPY MODES
Before Using Copying Functions
Default settings
This equipment is under its "default settings" when the power is turned ON, namely, if no setting change has
been applied yet, the equipment's settings return to the default ones when the energy saving mode is cleared
or the [FUNCTION CLEAR] button on the control panel is pressed. The default settings for basic copy modes
at installation are shown below.
Reproduction ratio
Copy quantity
Paper selection
Simplex/Duplex
Density adjustment
Original mode
Finishing mode
Feeding mode when using the RADF
The default settings are changeable. For details, refer to the MFP Management Guide.
Confirming the set functions
If you press [SETTINGS] on the touch panel, the menu shown below is displayed. On this menu, you can view
the functions that are currently set.
48
Before Using Copying Functions
Item
Default setting
100%
1
Automatic Paper Selection (APS)
1-sided original -> 1-sided copy
Automatic adjustment
TEXT/PHOTO
When using the original glass:
NON-SORT NON-STAPLE
When using the RADF (Reversing Automatic
Document Feeder):
SORT
Continuous feed mode