Toshiba e-STUDIO557 Copying Manual page 75

3.BASIC COPY MODES
Stapling and hole punching the sheets without making copies
You can place paper on the Inserter and only staple, hole punch or stitch the sheets without making copies.
This is useful when you forget to perform the finishing process after making copies.
1
Place paper on the Inserter.
P.72 "Placing paper on the Inserter"
When performing saddle stitching, place paper so that the cover
or back cover sheet will be at the bottom.
2
Perform settings of stapling and hole punching.
For stapling or saddle stitching, press the stapling button. The lamp corresponding to the selected
staple mode lights. Press the stapling button to switch the staple mode.
For hole punching, press the hole punch button. The hole punch lamp lights.
Saddle stitching is available only when the Saddle Stitch Finisher (optional) is installed.
The hole punch mode can be used together with the staple mode, not with the saddle stitch
mode.
3
Press the start button on the Inserter.
The operation starts. The start lamp blinks during operation and
all the lamps go off when it has finished.
Hole punch Staple
button/lamp button/lamp
3 BASIC COPY MODES
Selecting Finishing Mode 73