Toshiba e-STUDIO557 Copying Manual page 100

4 EDITING FUNCTIONS
5
Set the saddle stitch mode and the binding margin width as required.
1) When setting the saddle stitch mode, press [STAPLE ON]. If not required, press [STAPLE OFF].
2) Press either [
3) Press [OK].
For the maximum number of sheets available for saddle stitching, see the following page:
P.69 "Magazine sort / Saddle stitch"
6
Select other copy modes as required, and then press the [START] button on the control
panel.
98 Magazine Sort Mode
2 mm] (0.08") or [ 30 mm] (1.18") to adjust the binding margin width.