Polycom RSS2000 Getting Started Manual page 19

Additional Language Support
To enable an RSS2000 to support additional languages ( but not English, Chinese, or Japanese),
follow this process.
Image version check
Please check the RSS2000 image version following the commands below. Only an RSS2000 with
image version 5 or above can utilize additional language support.
1: Click on Start>Run>Enter "telnet 172.21.103.127 23" (without quotation marks), and Click OK.
NOTE: The IP address above is for EXAMPLE ONLY. Please replace it with your RSS2000 IP
address.
2: You will see a command prompt window after the command is executed. The window should
look like below.
3: Enter the password for your RSS2000. As a reminder, the default password is polycom. A
system welcome screen appears.
DOC2207B RSS2000 V3 0 1 Getting Started Guide + Release Notes