Messaging - Siemens Gigaset A580 IP User Manual

Messaging

Your Gigaset A580 IP base station has messaging functions that can be used via
a handset with messaging capability, e.g. a Gigaset S67H, S68H, SL37H or
C47H handset, which you can register to your base station.
The following messaging functions are available:
u
Messenger functions
The messenger client in your base station enables instant messaging
(immediate message transfer, chatting). The phone supports the XMPP mes-
senger (Jabber).
Saving messenger access data
In order to be able to use your base station's messenger functions, you need to
register a handset with messaging capability and save the access data for your
messenger server in the phone.
Your base station is already registered with the Gigaset.net Jabber server. An
account has been assigned to your phone. You can chat to other Gigaset.net
subscribers via this account. To do this, you need to log on to the Gigaset.net
messenger server via your PC's Web browser using only this account, and
then create a buddy list (
Page 142).
You can also register with another instant messaging provider that supports
XMPP Messenger (Jabber).
In order for you to use your phone's messenger to "go online" and "chat" on the
Internet, the access data of a messenger server must be saved on your phone.
You can define a
if you are logged in (online) on the messenger server with several devices
(phone, desktop PC and laptop) at the same time using the same Jabber
The Resource
cannot log in to the messenger server if it does not have a resource name.
You should assign a
each Jabber ID. The
sage.
Example
You are online using one of your phone's handsets and your PC both at the
same time. You have assigned your phone
and your PC
addressed to your Jabber ID will be sent to your phone.
£
"Setting up a Gigaset.net Jabber
name and a
Resource
name is used to distinguish between these devices. The phone
as each message will only be sent to one device for
Priority
determines which of the devices receives the mes-
Priority
(Resource name "PC") priority 10. In this case, any message
Web configurator – Setting the phone using a PC
for your phone. Both are required
Priority
(Resource name "phone")
account",
ID.
Priority 5
141