Activating/Deactivating Display Of Voip Status Messages; Checking The Base Station Mac Address - Siemens Gigaset A580 IP User Manual

Making VoIP settings on the handset

Activating/deactivating display of VoIP status messages

If the function is activated, a VoIP status code for your service provider is dis-
played.
Activate the function if, for example, you have problems with VoIP connections.
You will receive a provider-specific status code, which supports the service
when the problem is analysed. You will find a table with the possible status
screens in the appendix (
¢
§Menu§
~
Status on HS
a
ú For how to make the setting on the Web configurator,

Checking the base station MAC address

Depending on your network configuration, you may have to enter your base
station MAC address in your router's access control list, for example. You can
check your base station MAC address:
M 4 O M 5
§Menu§
The base station MAC address is displayed.
a
ú For information on how to check your MAC address on the Web configurator,
£
Page
100
£
Page
¢ ¢
Settings Base
Enter the system PIN and press
Select and press
Press and hold (idle status).
Press and hold (idle status).
151.
156).
¢
Telephony VoIP
.
§OK§
(‰ = on).
§OK§
£
Page 151.