Siemens Gigaset A580 IP User Manual page 143

Web configurator – Setting the phone using a PC
¤
Open the following Web page:
¤
In the
Jabber server or another provider's messenger server (Other).
The access data for
played in
you can also register with the Gigaset.net Jabber server through your PC.
¤
Enter the user ID (max. 50 characters) and password (max. 20 characters)
that you used to register with the messenger server in the
Authentication password
Gigaset.net
¤
In the
senger server with which you are registered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected
ured with the name of the Gigaset.net server.
¤
Enter the number of the communication port on the Jabber server in the
Jabber server port
If you have selected
preconfigured.
¤
Enter a resource name (max. 20 characters) in the
The default is: phone.
¤
Enter the priority for your phone in the
between -128 (highest priority) and 127 (lowest priority) for the priority.
The default is: 5
¤
Select Set.
Setting up a Gigaset.net Jabber account
Your phone is already registered with the Gigaset.net Jabber server. An account
has been assigned to your phone.
In order to chat with other Gigaset.net subscribers via this account, you must
add the required Gigaset.net subscribers to a contact list (buddy list) on your
PC. You can use any conventional Jabber client for this (e.g. PSI, Miranda; see
e.g. http://www.swissjabber.ch).
Do the following so you can use your Gigaset.net Jabber account:
¤
Start the Web configurator, open the
Web page and select the
data is displayed in
to create a buddy list via the Jabber client on the PC.
¤
Start your Jabber client on the PC.
¤
Enter your Gigaset.net
The Jabber ID
ber.gigaset.net".
Example: 12345678901#9@jabber.gigaset.net
¤
Then enter your
142
field, select whether you wish to use the
Messenger Account
Gigaset.net
Jabber ID, Authentication password
fields. If you have selected
the fields are preset with your Gigaset.net account.
field, enter the IP address or the DNS name of the mes-
Jabber server
Messenger Account =
field. The default port is 5222.
Messenger Account = Gigaset.net,
Messenger Account Gigaset.net
Jabber ID
Jabber ID
consists of your Gigaset.net number and "@jab-
Authentication
¢
Settings Messaging
is already stored in the base station. It is dis-
and
Jabber
Gigaset.net, the field is preconfig-
field. Select a number
Priority
¢
Settings
and password. You will need these
Authentication
on the Jabber client as a new account.
password.
¢
Messenger.
Gigaset.net
server. With this data
and
Jabber ID
Messenger Account =
the port number is
field.
Resource
¢
Messaging Messenger
field. Your account