Setting The Alarm Clock; Activating/Deactivating The Alarm Clock; Changing The Wake-Up Time; When The Alarm Clock Rings - Siemens Gigaset A580 IP User Manual

Setting the alarm clock

Precondition: The date and time have already been set (

Activating/deactivating the alarm clock

¢
§Menu§
Activation
After you activate the alarm clock, the menu for setting the wake-up time
opens automatically.
~
a
If the alarm clock is set, the wake-up time appears with the ¼ icon in the display
instead of the date.

Changing the wake-up time

¢
§Menu§
~
a

When the alarm clock rings...

A wake-up call with the selected ringer melody is signalled on the handset
£
( Page
pressed, the wake-up call is repeated twice at five minute intervals and then
turned off for 24 hours.
During a call, the wake-up call is only signalled by a short tone.
Alarm repeated after 5 minutes (snooze mode)
§Snooze§
If you press
Turning off the alarm clock for 24 hours
§Off§
Alarm Clock
Select and press
§OK§
If necessary, enter the wake-up time in 4 digits (hours and minutes)
and press .
§OK§
Press and hold (idle status).
¢
Alarm Clock Wake up time
Enter the 4-digit wake-up time (in hours and minutes) and then
press .
§OK§
Press and hold (idle status).
90). The wake-up call lasts for a maximum of 5 minutes. If no key is
Press the display key or any other key (apart from the left display
key).
three times, the alarm clock switches off for 24 hours.
§Snooze§
Press the display key.
(‰ = on).
Setting the alarm clock
£
Page 14).
77