H3C S5500-SI Series Operation Manual page 1107

Step-by-Step Patch Installation
Step-by-Step Patch Installation Task List
Configuring the Patch File Location
Loading a Patch File
Activating Patches
Confirming Running Patches
Configuring the Patch File Location
Follow these steps to configure the patch file location:
To do...
Enter system view
Configure the patch file location
The patch install command changes patch file location specified with the patch location command to
the directory specified by the patch-location argument of the patch install command. For example, if
you execute the patch location xxx command and then the patch install yyy command, the patch file
location automatically changes from xxx to yyy.
Loading a Patch File
Loading the right patch files is the basis of other hotfixing operations. The system loads a patch file from
the flash by default.
Set the file transfer mode to binary mode before using FTP or TFTP to upload/download patch files
to/from the flash of the switch. Otherwise, patch file cannot be parsed properly.
Task
Use the command...
system-view
patch location patch-location
1-6
Remarks
Optional
Required
Required
Optional
Remarks
—
Optional
flash: by default