Displaying And Maintaining Poe; Poe Configuration Example - H3C S5500-SI Series Operation Manual

Displaying and Maintaining PoE

To do...
Display the mapping between
ID, module, and member ID of
all PSEs.
Display the power state and
information of the specified
PoE interface
Display the power information
of a PoE interface(s)
Display the information of PSE
Display the power state and
information of all PoE
interfaces connected with the
PSE
Display the power of all PoE
interfaces connected with the
PSE
Display all information of the
configurations and applications
of the PoE configuration file
Display all information of the
configurations and applications
of the PoE configuration file
applied to the specified PoE
interface

PoE Configuration Example

Network requirements
The device provides power supply for PDs through PoE interfaces.
GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are connected to IP telephones.
GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12 are connected to access point (AP) devices.
The power priority of GigabitEthernet 1/0/2 is critical.
The power of the AP device connected to GigabitEthernet 1/0/11 does not exceed 9,000 milliwatts.
Use the command...
display poe device
display poe interface
[ interface-type
interface-number ]
display poe interface power
[ interface-type
interface-number ]
display poe pse [ pse-id ]
display poe pse pse-id
interface
display poe pse pse-id
interface power
display poe-profile [ index
index | name profile-name ]
display poe-profile interface
interface-type interface-number
1-8
Remarks
Available in any view