To do...
Enter system view
Configure the port number of
the HTTPS service
If you execute the ip https port command for multiple times, the last configured port number is used.
Associating the HTTPS Service with an ACL
Associating the HTTPS service with an ACL can filter out requests from some clients to let pass only
clients that pass the ACL filtering.
Follow these steps to associate the HTTPS service with an ACL:
To do...
Enter system view
Associate the HTTPS service
with an ACL
Displaying and Maintaining HTTPS
To do...
Display information about
HTTPS
HTTPS Configuration Example
Network requirements
Host acts as the HTTPS client and Device acts as the HTTPS server.
Host accesses Device through Web to control Device.
CA (Certificate Authority) issues certificate to Device. The common name of CA is new-ca.
In this configuration example, Windows Server serves as CA and you need to install Simple Certificate
Enrollment Protocol (SCEP) component.
Use the command...
system-view
ip https port port-number
Use the command...
system-view
ip https acl acl-number
Use the command...
display ip https
2-4
Remarks
—
Optional
By default, the port number of
the HTTPS service is 443.
Remarks
—
Required
Not associated by default.
Remarks
Available in any view