Main Operation - Panasonic AJ-HPX2700G Operating Instructions Manual

MAIN OPERATION

The ____ in the Adjustable Range column indicates the preset mode.
BATTERY/P2CARD
Items/ Adjustable
Data Saved Range
Select the battery to use. Remaining
BATTERY PROPAC14
SELECT TRIMPAC14
capacity detection is also performed
HYTRON50
according to the selected battery.
HYTRON140
The variable range is changed by the
DIONIC90
item settings selected on the [BATTERY
DIONIC160
SETTING1] (page 190) and [BATTERY
NP-L7
ENDURA7
SETTING2] (page 191) menus.
ENDURA10
The initial value for "TYPE A" is set to
ENDURA-D
"DIONIC90" while the same for "TYPE B"
PAG L95
is set to "HYTRON140".
BP-L65/95
When BP-GL65 or BP-GL95, a battery
NiCd14
TYPE A made of Sony, is used, set this to "BP-
TYPE B
L65/95".
– C U F –
EXT DC IN AC_ADPT Set the remaining capacity detection
SELECT PROPAC14
type when a battery is connected to the
TRIMPAC14
DC IN connector. Remaining capacity
HYTRON50
detection is also performed according to
HYTRON140
the selected battery type.
DIONIC90
The variable range is changed by the
DIONIC160
NP-L7
item settings selected on the [BATTERY
ENDURA7
SETTING1] (page 190) and [BATTERY
ENDURA10
SETTING2] (page 191) menus.
ENDURA-D
Analog voltage is displayed on the
PAG L95
viewfinder screen.
BP-L65/95
NiCd14
When BP-GL65 or BP-GL95, a battery
TYPE A
made of Sony, is used, set this to "BP-
TYPE B
L65/95".
– C U F –
BATT NEAR ON Select whether or not to set the alarm to
END ALARM OFF
beep when the battery level is low.
– C U F –
BATT NEAR ON If set to "ON", the warning tone and
END CANCEL OFF
indication can be canceled by pressing
the MODE CHECK button when BATT
NEAR END ALARM is triggered.
– C U F –
Select whether or not to set the alarm to
BATT END ON
ALARM OFF
beep when the battery is empty.
– C U F –
BATT REMAIN 70% Set the display of the remaining battery
FULL 100%
level indicator bar in the display window
when a battery with this function is used.
70%:
100%: Indicate FULL at 100% capacity.
– C U F –
Remarks
Indicate FULL at 70% capacity.
Items/ Adjustable
Data Saved Range
Select whether or not to set the alarm to
CARD NEAR ON
END ALARM OFF
beep when the space remaining on the
P2 card is small.
– C U F –
CARD NEAR 2min Set the time at which to indicate that
END TIME 3min
there is little space remaining on the P2
card.
– C U F –
CARD END ON Select whether or not to set the alarm to
ALARM OFF
beep when the P2 card is full.
– C U F –
CARD REMAIN/ 3min/ Set the length of time for one segment
5min/
( ) of the P2 card's remaining capacity
indicator bars.
3min/ : One segment represents
5min/ : One segment represents
– C U F –
Menu: Menu Description Tables
Remarks
3 minutes.
5 minutes.
189