Rec Function - Panasonic AJ-HPX2700G Operating Instructions Manual

REC FUNCTION

Items/ Adjustable
Data Saved Range
INTERVAL REC OFF Sets INTERVAL REC function.
MODE ON
OFF:
ONE SHOT
ON:
ONE SHOT:
Note
This item cannot be changed when "ON"
is selected in LOOP REC MODE.
– C U F –
Selects whether INTERVAL REC MODE
INTERVAL REC ON
HOLD OFF
settings are retained or not when the
power is turned off once.
ON:
OFF:
– C U F –
REC TIME* 00s01f Set recording time for INTERVAL REC
:
(1 cut).
59s29f
Note
However the settings can be made
frame by frame, and the numbers of the
cut-off unit frames for the shortest time
period and the set time on the actual
operation may vary with the recording
method. For details, refer to [Interval
Recording] (page 41).
– C U F –
PAUSE TIME* 00h00m00s01f Specify pause time for INTERVAL REC.
:
Note
00h04m59s29f
However the settings can be made
:
frame by frame, and the numbers of the
23h59m59s29f
cut-off unit frames for the shortest time
period and the set time on the actual
operation may vary with the recording
method. For details, refer to [Interval
Recording] (page 41).
– C U F –
Specify the time needed for INTERVAL
TAKE TOTAL NONE
TIME :
REC.
5day
Select from "NONE" (continue until
operation is manually stopped) to
5 days.
– C U F –
Display total recorded time for
TOTAL REC NONE
TIME* 00m00s01f
INTERVAL REC. The setting cannot be
:
changed using this option. Displays the
99m59s29f
recording time (recording time needed
OVER100min
for the P2 card) calculated using REC
TIME, PAUSE TIME, and TAKE TOTAL
TIME.
Note
A value based on actual processing is
displayed.
– – – – –
AUDIO REC ON Select whether or not sound will be
OFF
recorded during INTERVAL REC.
– C U F –
Set the delay after pressing REC
START DELAY 0SEC
:
START/STOP to start recording in
10SEC
INTERVAL REC.
– C U F –
* This variable range is the numerical values for 59.94 Hz. For
50 Hz, the frame rate is up to 24f. The frame rate is up to 23f in
24PN (Native) mode.
Remarks
INTERVAL REC is not
performed.
Uses internal memory to perform
interval recording.
Performs "one-shot" recording
for the duration specified under
REC TIME, and then stops.
Retain
Do not retain. The INTERVAL
REC MODE is "OFF" whenever
the power is turned on again.
Items/ Adjustable
Data Saved Range
PRE REC MODE ON Select whether or not to enable PRE
OFF
RECORDING.
ON:
OFF:
Note
Specify the PRE RECORDING time by
using the menu option PRE REC TIME.
– C U F –
Set PRE RECORDING.
PRE REC TIME 1SEC
:
1-8SEC:
8SEC
– C U F –
Select whether or not to enable LOOP
LOOP REC ON
MODE OFF
REC.
This setting can be used with PRE
RECORDING features.
ON:
OFF:
Notes
After the power is turned off, this item
will default to "OFF" the next time the
power is turned on.
This item cannot be changed when
"ON" or "ONE SHOT" is selected in
INTERVAL REC MODE.
– – – F –
REC START ALL Select operating modes that allow
NORMAL
recording to start.
ALL:
NORMAL:
Note
Even if this is set to "ALL", the operation
is "NORMAL", when "ON" or "ONE
SHOT" is selected in INTERVAL REC
MODE.
– C U F –
P.ON REC SLOT HOLD Select the recording order of the slot
SEL SLOT1
when the power is turned on.
HOLD: The recording order starts with
SLOT1: The recording order starts with
– C U F –
Note
Displayed REC TIME, PAUSE TIME and TOTAL REC TIME
are translated into either drop-frame or non-drop-frame
according to the mode of operation.
TAKE TOTAL TIME is actual time. Therefore, TOTAL REC
TIME may incorporate fractions, depending on the settings.
Example of drop-frame
REC TIME
PAUSE TIME
TAKE TOTAL TIME
TOTAL REC TIME
Menu: Menu Description Tables
Remarks
PRE RECORDING enabled.
PRE RECORDING disabled.
Set the length of time that can be
retrospectively recorded before
the REC START/STOP button is
pressed.
Enable LOOP REC.
Disable LOOP REC.
Allow recording to start during
stop, recording pause, and
playback.
Allow recording to start during
stop and recording pause.
the card previously selected
when the power was turned off.
the card that is inserted in slot 1
when the power is turned on.
02s00f
02s00f
40min
19m59s06f
167