Output Sel - Panasonic AJ-HPX2700G Operating Instructions Manual

OUTPUT SEL

Items/ Adjustable
Data Saved Range
OUTPUT ITEM MENU ONLY
TC
STATUS
– C U F –
HD SDI A · B ON
CHAR OFF
– C U F –
MONITOR OUT VBS
HD SDI
– C U F –
MONITOR ON
GAMMA OFF
– C U F –
168
Menu: Menu Description Tables
Remarks
Set the character contents
superimposed onto the output signals for
the HD SDI A · B connector and MON
OUT connector.
MENU ONLY:
Displays only when the menu
characters are superimposed.
No display appears when other
characters are superimposed.
TC: Display the time code. (Displays
the menu when menu characters
are superimposed.)
Note that when "1080-23.98PsF"
or "1080-24PsF" has been
selected in the SYSTEM MODE
menu option, the frame digits will
not be updated correctly.
STATUS: Display the same characters
superimposed on the viewfinder
signal. (Displays the menu when
menu characters are
superimposed.)
Select whether to superimpose
characters on the HD SDI A · B
connector. (The character content output
from the HD SDI A · B and MON OUT
connectors is the same.)
ON: The characters are
superimposed.
OFF: The characters are not
superimposed.
Select the output signal on the MON
OUT connector.
This sets whether to perform telecine
conversion correction on the MON OUT,
RC OUT, and LCD OUT signals when
GAMMA MODE SEL is set to "FILM-
REC".
ON: Correction is performed.
OFF: Correction is not performed.
Items/ Adjustable
Data Saved Range
This sets whether to superimpose
VFR/LCD CHAR VF-OFF
LCD-OFF
characters on the video shown on the
ON
LCD monitor and in the viewfinder.
Note, however, that the characters are
output to one of the MON OUT, VF OUT
and LCD OUT signals.
– C U F –
VF MODE MEM Select the image to display in the
CAM
viewfinder.
MEM: Display the playback image in
CAM: Always display the camera
– C U F –
Select the video signal that is output to
VF SEL MONO
COLOR
the viewfinder connector.
MONO:Output the Y signal alone to the
COLOR: Output the Y, P
– C U F –
THUMBNAIL ON Select whether or not to output clip
OUT OFF
thumbnails displayed on the LCD
monitor to the MON OUT (VBS) signal
and the REMOTE connector.
ON:
OFF:
Note
Even when the MON OUT OUTPUT SEL
switch is in the [CAM] position,
thumbnails are output when this option is
set to "ON".
– C U F –
DOWNCON LT-BOX For setting the mode of the down
MODE SQUEEZE
converter output signals.
– C U F –
Remarks
the playback mode. Display the
camera image at other times.
image.
viewfinder connector.
, and P signals
B R
to the viewfinder connector.
Enable output.
Disable output.