Switching The Thumbnail Display - Panasonic AJ-HPX2700G Operating Instructions Manual

The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the THUMBNAIL MENU button. The thumbnail
menu appears.
a. THUMBNAIL MENU button
124
Manipulating Clips with Thumbnails: Switching the Thumbnail Display

Switching the Thumbnail Display

a
3
Select THUMBNAIL from the thumbnail menu. Switch
the thumbnail display by selecting one of the following
items:
ALL CLIP:
Display all clips.
SAME FORMAT CLIPS:
Displays clips of the current system format.
SELECTED CLIPS:
Display randomly selected clips.
MARKED CLIPS:
Display clips with shot marks attached.
TEXT MEMO CLIPS:
Display clips with text memo data attached.
SLOT CLIPS:
Display clips recorded in the P2 card inserted
in the specified slot.
When this item is selected, "SLOT1" to
"SLOT5" are displayed as a sub-menu. Select
the desired slot to display the clips.
SETUP: Please refer to [Setting the Thumbnail Display
Mode] (page 136) for information about this
item.
EXIT: Close the sub-menu.