P2 Card Status Display - Panasonic AJ-HPX2700G Operating Instructions Manual

3
Press the SET button.
The input window (soft keyboard) for modifying
metadata is displayed. Use the keyboard to modify the
metadata.
The keyboard operation is the same as [Checking and
modifying read metadata] (page 132).

P2 Card Status Display

P2 Card Status Display Settings
Select PROPERTY
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the THUMBNAIL MENU button and select
PROPERTY PROPERTY SETUP
from the thumbnail menu.
The following screen appears. Select the P2 card status
display settings from the P2 CARD CAP menu option.
REMAIN:
Show remaining free space on the P2 card as
the P2 card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card
as the P2 card status display.
138
Manipulating Clips with Thumbnails: Properties
CARD STATUS from the thumbnail
P2 CARD CAP
4
Press OK on the keyboard to write the modified
metadata on the clip and return to the metadata window.
Notes
Deleting only the respective items of LOCATION
(recording location data) in SHOOT is not possible. By
setting ALTITUDE to empty, other LONGITUDE/
LATITUDE items are collectively deleted.
The metadata for a clip with the
indicator cannot be modified. For the clips recorded on
multiple P2 cards, modify the metadata while all P2 cards
are inserted.
Any MEMO with 100 characters or more cannot be
modified.
incomplete clip