General Precaution And Safety Information For Engine Reconstruction; Special Tools - Rotax 125 Max Retrofit Instruction

RETROFIT INSTRUCTION FOR ROTAX 125 MAX ENGINES

1. General precaution and safety information for engine reconstruction

 Warning: For the best possible engine operation, compliance with the following advice
regarding reconstruction of the engine is required.
 Warning: Engine operation is permitted only with equipment supplied by ROTAX.
 Warning: Modifications on engine or equipment are not allowed.

2. Special tools

All packing material is recyclable and should be disposed of accordingly.
part no.
676035
676052
877930
580130
580132
676110
 Note: This retrofit instruction describes the most extensive reconstruction of a ROTAX kart engine
(from MICRO to MAX). For other reconstructions you can refer to the similar working steps
in this document.
 Note: In case of participating in the ROTAX MAX CHALLENGE (RMC) the engine must be verified
for conformity with the technical regulations and sealed.
The serial number of the seal must be entered in the engine identity card.
Seite/page 31/59
Umbauanleitung/retrofit instruction 125 MAX Series
special tool
insertion tool for installation of piston pin circlips
fixing plate engine
trestle support engine
tin wire 3 mm inspection of squish gap
tin wire 2 mm inspection of squish gap
wrench adapter cylinder
application
Ausgabe/Edition 09/2014