1 TECHNICAL SPECIFICATIONS
1.1
CONSTRUCTION
Model ........................................................................................................MERRY FISHER 605
Architect / Interior design.............................................................. Centkowski & Denert Design
Builder .........................................................................................................................SPBI S.A
Principal means of propulsion ...........................................................................................Motor
Deck construction material ....................................Laminated sandwich glass / Polyester / Sinter & Foam
Hull construction material ...................................... Single skin laminated fibreglass / Polyester
Application .............................................................................................................Wet laid fibre
1.2
GENERAL DIMENSIONS
L.O.A - without engine (L
(Including removable parts that can be dismantled without affecting the boat's structure(bow roller, pulpit,
platform))
Hull length (L
)* ...............................................................................................................5,51 m
h
(Excluding: removable parts that can be dismantled, without affecting the structure of the boat)
Overall width (B
)*........................................................................................................2,46 m
max
(Including: removable parts that can be dismantled, without affecting the structure of the boat)
Beam(B
)*........................................................................................................................2,40 m
h
(Excluding: removable parts that can be dismantled, without affecting the structure of the boat)
Air draught – Empty vessel..............................................................................................2,50 m
Draught - Boat fully laden - without engine......................................................................0,43 m
Wetted surface area .................................................................................. Approximately 11 m²
1.3
ENGINE
Nominal maximum propulsion power ...............................................................................85 Kw
Maximum recommended engine size .............................................................................. 220 kg
1.4
ELECTRICITY
Circuit type - Direct current.................................................................................................. 12V
Circuit type - AC ................................................................................................................ 220V
1.5
CAPACITIES
Total mass of the liquid content of fixed tanks when they are full ..................................... 95 kg
Fuel capacity ...................................................................................................................... 100 l
Fresh water capacity ............................................................................................................ 20 l
It may not be possible to use these capacities fully depending on the trim and load of the boat.
It is recommended to keep a reserve of 20% in the fuel tanks.
993256
Index A
)* .........................................................................................5,79 m
max
- 11 -
1