Drainage System - Jeanneau MERRY FISHER 605 Owner's Manual

5.4.2 Drainage system

General points
- The inner moulding of the hull has channelling: the drainage channels. The drainage
channels allow the water to drain down to the lowest point in the boat, where it can be
discharged. So it is important to allow the water to flow freely down to this lowest point of the
boat, which includes.
- Regularly cleaning the lowest point of the boat and the drainage channels.
Reference
1 Manual bilge pump
2 Electric bilge pump
3 Electric bilge pump switch
(*) 45 strokes/minute
If 70 stroke/minute: rate 35p/minute
Diagram of the layout - Bilge pumps
Designation
- 32 -
Rate
32p/minute (*)
20p/minute
993256
Index A