Feeding The Fuel - TOHATSU MFS 15 Owner's Manual

30
ENGINE OPERATION
1
1. Full open the Air vent screw
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the tank cap.
For USA and Canada model
1. Full open the air vent screw on the tank
cap and release internal pressure.
1
1. Full open the air vent Screw
2. Tab lock
ENOF00417-0
ENOF00419-0
2
ENOF00421-0
2. Loosen the tank cap until it contacts
the tab lock and release internal pres-
sure completely. After that, press down
the tab lock and open the tank cap.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the tank cap
until two clicks sound is heard.
ENOM00044-0

2. Feeding the fuel

Except for USA and Canada
model
1. Full open the air vent screw on the tank
cap.
2. Open the fuel tank cap slowly and
release internal pressure completely.
After that, close the fuel tank cap.
3. Connect the fuel connector to the
engine and squeeze primer bulb until it
becomes stiff to feed fuel to carburetor.
Direct arrow mark upward when prim-
ing.
ENOF00419-0