List Of Memory Switch Data - JUKI DDL-9000C-S Instruction Manual

4-5. List of memory switch data

No.
U001 Soft-start function
The initial value differs with the machine head. (0: OFF)
U007 Bobbin thread count-down unit
0: 10 stitches / 1: 15 stitches / 2: 20 stitches
U008 Reverse feed stitching speed
The initial value differs with the machine head.
The number of revolutions set with this memory switch is given precedence
even if it is lower than the lowest speed by pedal.
U013 Bobbin thread count stop function
0: Sewing machine start prohibition function is disabled even when the
counter completes counting (negative value).
1: When the counter completes counting, the sewing machine start after
thread trimming is prohibited.
2: When the counter completes counting, the sewing machine temporarily
stops and the start of sewing machine after thread trimming is prohibited.
* Note that the prohibition function is disabled in the case the initial value of
counter is 0 (zero).
U014 Sewing count function
1: Automatic sewing counter / 2: Sewing counter switch input
U021 Presser foot lift when the pedal is in its neutral position
0: Disabled / 1: Enabled
U025 Operation after manual turning (thread trimming)
This memory switch is used for setting the thread trimmer operation after the
sewing machine has moved from its upper/lower stop position by manual
turning of handwheel.
0: Permitted / 1: Prohibited
U035 Minimum speed of the pedal
The maximum number of revolutions during thread trimming differs with the
machine head.
U036 Speed during thread trimming
The maximum number of revolutions during thread trimming differs with the
machine head.
U037 Speed during soft start
The maximum number of revolutions during soft start differs with the machine head.
The number of revolutions set with this memory switch is given precedence
even if it is lower than the lowest speed by pedal.
U038 Speed during one-shot stitching
The maximum number of revolutions during soft start differs with the machine head.
U039 Start position of rotation
U040 Start position of acceleration
U041 Start position of lifting of presser foot
U042 Start position of lowering of presser foot
U043 Start position of thread trimming
U044 Position that maximum sewing speed is reached
U045 Pedal neutral-position correction value
Item
– 48 –
Setting range Unit
0 to 9 Stitch
ー
0 to 2
150 to 3000 sti/min
ー
0 to 2
ー
1 to 2
ー
0 to 1
ー
0 to 1
150 to Max. sti/min
of thread
trimming
150 to Max. sti/min
of thread
trimming
100 to Max. sti/min
100 to Max. sti/min
ー
10 to 5000
ー
10 to 1000
ー
-500 to -10
ー
10 to 500
ー
-1000 to -100
ー
10 to 15000
ー
-150 to 150