Copying A Cycle Pattern - JUKI DDL-9000C-S Instruction Manual

8-3-2. Copying a cycle pattern

① Selecting the cycle pattern copy function
<Cycle pattern management screen>
② Creating/copying a cycle pattern
<Cycle pattern copy/deletion screen>
2. Execute or cancel copy of the cycle pattern following the procedure described below.
❺ to execute copy. Then, the current screen is returned to the cycle pattern manage-
・ Press
ment screen.
❻ to display the copy cancellation confirmation screen. Press
・ Press
copy. Then, the current screen is returned to the cycle pattern management screen.
❶
1. Press
to display the mode screen.
2. Select "04 Cycle management" by
pressing
management screen.
3. Select "01 Copy/delete cycle pattrn"
❾
❺
by pressing
copy/deletion screen.
❶ ❷
1. Select a source pattern number by
pressing
tination pattern number by pressing
❺ ❻
– 85 –
❾ on the sewing screen
❶ . Then, press
❺ to display the cycle pattern
❶ . Then, press
❺ to display the cycle pattern
❶ . Select a des-
❷ .
❻ again to cancel