GE 745 Instruction Manual page 225

CHAPTER 6: ACTUAL VALUES
6.4 A3 Event Recorder
6.4.1 Event Data Clear
 EVENT DATA
CLEAR
6.4.2 Event Records
 EVENT 001
745 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
PATH: ACTUAL VALUES

[]
MESSAGE
MESSAGE
MESSAGE
MESSAGE
Enter "Yes" for the CLEAR EVENT DATA RECORDER
CLEAR EVENT RECORDER SIGNAL
clearing of the event recorder. The last date and time the event data were cleared are also
displayed. If the date has never been programmed, the default values shown above
appear.
PATH: ACTUAL VALUES


[ ]
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
A3 EVENT RECORDER EVENT DATA CLEAR

CLEAR EVENT DATA
RECORDER? No
CLEAR EVENT RECORDER
SIGNAL: Disabled
DATE OF LAST CLEAR:
Jan 01 1996
TIME OF LAST CLEAR:
00:00:00.000
NO. OF EVENTS SINCE
LAST CLEAR: 0
to clear all event recorder data. The
actual value assigns a logic input to be used for remote
A3 EVENT RECORDER EVENT 001(256)

EVENT DATE:
Jan 01 2001
EVENT TIME:
00:00:00:000
EVENT CAUSE: On
Control Power
W1 PHASE A CURRENT
0 A at 0° Lag
W1 PHASE B CURRENT
0 A at 0° Lag
W1 PHASE C CURRENT
0 A at 0° Lag
W1 GROUND CURRENT
0 A at 0° Lag
W1 (% ƒo) H2a: 0.0
H2b: 0.0 H2c: 0.0
W1 (% ƒo) H5a: 0.0
H5b: 0.0 H5c: 0.0
W2 PHASE A CURRENT
0 A at 0° Lag
A3 EVENT RECORDER
6–17