Electrical Requirements For The Print Servers - Xerox Versant 80 Press Installation Manual

Versant 80 Press
Item
Current/run power
Voltage (VAC)
Power cord
length
Receptacle NEMA part number
NOTE: Use surge protection only as required, and it is the responsibility of the customer.
Optional finishing device
1-Tray OHCF
Advanced HCF (Single or Dual
configuration)
Interface Module
GBC AdvancedPunch Pro
High Capacity Stacker (HCS)
Standard Finisher
Booklet Maker Finisher
SquareFold Trimmer Module
2-Knife Trimmer Module
Finisher
Module
Standard
Finisher
Finisher Plus
Transport
NOTE:
The Standard Finisher Plus requires two NEMA receptacles (NEMA 5-15R or 5-20R).

Electrical Requirements for the Print Servers

FreeFlow Print Server
Print Server Item
Monitor
Controller (hard drive)
Customer Expectation & Installation Guide
Current / run power
2.5 amps
1.5 amps
5 amps
3 amps
1.5 amps
1.2 amps
0.8 amps
2 amps
2 amps
0.4 amps
4 amps
1 amps
5 amps
Current / run power
25 watts
365 Watts
5.5 amps at 110 VAC and 2.5 amps
at 20 VAC
1-Tray OHCF / Advanced HCF
3 amps/65 watts
1-Tray OHCF – 100-120V 2.5A, 220-240V 1.5A
Advanced HCF – 100-120V 5A, 220-240V 3A
8.2 feet/2.5 meters
5-15R or 5-20R
Voltage (VAC)
100-120 8.2 feet / 2.5 meters
220-240
100-120 8.2 feet / 2.5 meters
220-240
100-240 8.2 feet / 2.5 meters
100-240 8.2 feet / 2.5 meters
100-240 8.2 feet / 2.5 meters
100-240 8.2 feet / 2.5 meters
100-240 8.2 feet / 2.5 meters
100-240 8.2 feet / 2.5 meters
100-230 14.8 feet / 4.5 meters
100-240 8.2 feet / 2.5 meters
100-240 8.2 feet / 2.5 meters
Voltage (VAC), Power cord length
North America
(NA)
100-240v 7.5 feet/2.3 meters
50/60 Hz +/- 3 Hz
100-240 V 7.5 feet/2.3 meters
50 / 60 Hz
Power cord length Receptacle NEMA
part number
5-15R or 5-20R
5-15R or 5-20R
Receptacle NEMA
part number
5-15R
5-15R
5-15R
5-15R
5-15R
5-15R
5-15R
5-15R
5-15R
5-15R
5-15R
45