Specifications - Xerox Versant 80 Press Installation Manual

Versant 80 Press
Space Requirements
All standard Xerox space requirements apply to this installation including overhead, shared, aisle or hallway, and operator
space. The customer is responsible to provide appropriate floor spacing and placement surface. Refer to
Requirements/Service Space Envelope
To enable a Service Representative to safely repair the system, the work area must measure at least 36 inches (91.44 cm)
square around the server. There must be a minimum of 78 inches (198.12 cm) clearance from the floor to the nearest
overhead obstructions.
The work surface of the network controller must not infringe on the space requirements by the press and any attached
accessories unless the work surface is a table that has wheels and can easily be moved. Storage and future availability of
software that ships with the color server is a customer responsibility. Xerox personnel do not carry replacement materials.
NOTE: Power cord for the FreeFlow Print Server is approximately 7.5 feet (2.3 meters).

Specifications

Hardware
Processors
Platform OS
System Memory (Minimum)
Hard Drive (Minimum)
DVD Drive
Serial Interface
USB Interfaces
Monitor Size
Stand
Removable Hard Drive
Electrical
BTU/Hour
Module Dimensions
Running Antivirus Software
While installing anti-virus software is not prohibited, Xerox has not tested anti-virus applications for the Sun/Solaris Operating
System with the FreeFlow print Server, their effectiveness or possible impact to productivity and reliability. The Solaris 10
Operating System is one of the most secure operating system earning the Common Criteria Certification of security assurance,
rated at EAL 4+. Oracle/Sun is constantly evaluating security vulnerability research reports and releasing patches quickly to
ensure Solaris remains secure from attackers. Of note, there are few commercial anti-virus products available for Solaris.
The few anti-virus software products that are available for Solaris typically focus on detecting Microsoft-targeted viruses that are
received via email. The FreeFlow Print Server has disabled email services by default. Therefore, software that protects against
incoming mail viruses is not required. The server also does not send email by default, and this is not a source of virus propagation.
To effectively stop the spread of virus software that might conceivably be introduced into the print server via removable media or
USB drives, the System Administrator may disable these points of access.
If a customer decides to install an anti-virus product on the FreeFlow Print Server, they are responsible for maintaining updates to
the product. If system reliability and performance issues are subsequently reported, Xerox will required the product be removed
and the problem replicated, before attempting to diagnose or troubleshoot the problem.
Security
The customer is responsible for assessing the security risk for their environment and defining appropriate mitigation that may
include changes to the default settings of the Xerox equipment or standard operating processes. Xerox understands the
importance of maintaining a secure network environment and recommends that customers change the default built-in
passwords and modify the security-related configuration options to satisfy their site-specific requirements upon completions of
system installation. Xerox is committed to helping the customer keep the print server secure and compliant with the latest
security requirements. This is managed via a Security Audit Process.
Customer Expectation & Installation Guide
for space requirements that are matched to your Xerox FreeFlow Print Server.
FreeFlow Print Server
Intel Core 17 4770S 3.1 GHz
Solaris 10 update 11
32 GB Memory
2X500 GB SATA
DVD R/W
Yes
4 usb 3.0, 6 usb 2.0
19 in. square screen
Optional
Optional through XSIS (US only)
Refer to Electrical Requirements for the Print Servers
Refer to Environmental Requirements
Refer to Module Dimensions for the FreeFlow Print Server
Space
13