Siqa; Support Services; Call Procedure; Product Sustainability - Xerox Versant 80 Press Installation Manual

Versant 80 Press

Calibrating routinely (to maintain gray balance) will extend the period of time for which an Advanced Profile can be used. If
calibration is performed regularly, the profile should be accurate for up to a month; however some customers prefer to
replace their profiles every 2 weeks to ensure accuracy.

A new (replacement) Advanced Profile may need to be generated after certain service procedures such as photoreceptor
drum replacement or charge corotron replacement.

If a jam or other fault occurs during printing of the profile sheets, the Profiling operation will automatically be aborted and
the operator may need to restart the Advanced Profile creation process.

SIQA

The New 80 Press includes a number of procedures, collectively called Simple Image Quality Adjustments that use the on-press
scanner to adjust image quality. The SIQA toolset can be used to adjust inboard-to-outboard uniformity ("smile" correction) and
side-to-side registration, as well as image transfer settings. These adjustments are performed by initiating the process at the user
interface which generates a set of prints. These prints are then scanned using the on-press scanner, which automatically feeds
the measurement data back to the press where the necessary adjustments are made.
SIQA Notes and Caveats

In general, the inboard-to-outboard uniformity correction does not depend on which particular stock and tray is used. One
correction will be sufficient for all stocks and trays.

Side-to-side registration correction does depend on the specific stock and tray.

Image transfer adjustment is dependent on the specific stock.

Support Services

Call Procedure

Contact your local sales and service team for details.

Product Sustainability

Packaging Take-Back Service for Xerox Branded Products
Whenever possible, we encourage you to recycle packaging locally as it reduces greenhouse gas emissions associated with
transportation. However, if unable to recycle locally, please check with your local sales and service team for recycling instructions.

Supplies and Consumables

Xerox supplies for your machine, including paper and CRUs, can be ordered from Xerox by going to www.xerox.com and clicking
on either the Contact link for specific contact information/telephone numbers in your area or by clicking on the Supplies link and
entering/selecting your specific machine information (product family and model type).
NOTE:
Always refer to www.xerox.com
It may be helpful to know the press serial number before calling for support. The press serial number can be accessed either by
locating the serial number plate on the inside frame of Tray 1, or by accessing the Press Control Panel:

Press the Machine Status button.

From the Machine Status screen, ensure that the Machine Information tab is displayed.

The press serial number is displayed under General Information.
Customer Expectation & Installation Guide
for the latest Customer Replaceable Units (CRUs) part numbers.
35