Xerox Versant 80 Press Installation Manual page 23

Versant 80 Press
FreeFlow Print Server Software Limitations
Print Server

In this release the banner pages are printed at the end of the job.

Up to a 30 second delay may occur between the first page(s) in a cycle up being black only and a color page.

The preferred stock to calibrate and profile using the ILS and i1 is a coated 120 gsm stock.

The X-Rite i 1 pro2 OEM (uv-cut) spectrophotometer is supported on this release of FreeFlow Printer Server. The uv-include is
not supported

Overprint with Pantone tints may not reproduce as expected when using the Postscript image path.

During Scanner calibration routines if an error occurs, you may have to close the routine and restart the routine again.

When using the Adobe PDF Print Engine:
AlE is not supported
o
Color adjustments/User TRC will effect spot colors
o
RGB emulation enables a general APPE "emulation mode" for all color spaces; this is a desirable behavior but not obvious
o
in the UI.
Device N color spaces are not color-managed (as per Adobe model but different from the Postscript path ).
o

Emulation modes are not applicable at page level (RGB Emulation or Process as PDF/X); these buttons ore ignored in the
page level programming.

5,000-page exceptions limit via FreeFlow Print Server tickets. Unlimited page exceptions via PDL (e .g. setpogedevice).

Background forms do not work with imposition.

Imposition does not work with Saved FRF files. You will need to impose and then save the imposed page for FRF reprint.

DRI preview is not supported in SAVE at 1200x1200 dpi, use 600x600 dpi

Status may infrequently display inaccurate processing feedback.

Attributes page list features that are not supported (e.g. K100HR, edge enhancement).

Special Pages not supported in the Save Job Properties feature.

K100HR at 600/1200 spi is not supported in this release.

Limit of 4GB for 1200 spi SAVE (limit reached sooner when using the 1200 spi versus 600).

When initiating a backup, do not choose licenses, network files and VIPP files.
Page Description TIFF/PPML/PDF

It is not recommended to save jobs as TIFF files if they are to be reprinted, instead use FRF file format

It is not recommended to save jobs as TIFF at 1200 as the number of pages that can be saved is limited to 4GB and is
reached quicker than if using 600.

Background Forms using 1200 spi is not supported. Use 600 spi to save and apply Background Forms
DVD/CD-RW and USB

Configuration backup to DVD/CD-RW fails if more than one CD is required

Some incorrectly formatted UDFS CDs cause the FreeFlow Print Server to hang. Some PC applications may also produce
UDFS CDs that cause the printer to hand. Reboot the print server and avoid using the application that created the CD.

Do not rename a configuration backup CD. Renaming a CD used for configuration backup causes the system to be unable to
perform a restore from the CD.

Backup and Restore is backwards compatible not forwards compatible

Some unsupported USB drives can cause the system to hang.
Client

Incorrect finishing option (stapling) can get applied to a landscape job submitted from the PostScript printer driver. Rotate
180 prior to submission or rotate the file by 180 at the print server.

FreeFlow Makeready customers should be running version 9.0 SP3 or higher.

You can only run one instance at a time of FreeFlow Remote Print Server on a single XP/Vista

FreeFlow Remote Print Server does not support the Mac Operating System.

Do not assign a job name with more than 255 characters

Page borders may get cropped on the output when selection N-up from the driver. Scaling the document by 98% will
prevent the border from being cropped by the press digital erase feature.

In the printer driver, the driver will not display the proper media and coating type (eg. Uncoated, coated).
Customer Expectation & Installation Guide 19