Xerox Versant 80 Press Installation Manual page 29

Versant 80 Press
Stacker Tray
Standard Finisher Stacker Tray Capacity by weight and paper finish
Paper type and weight
Uncoated 52-80 gsm
80-300 gsm
Coated 106-300 gsm
*Cannot be offset
301-350 gsm media cannot be sent to the Stacker Tray (accepted to Top Tray only)
Stapling
Standard Finisher Staple Capacity by weight and paper finish
Paper type and weight
Uncoated 52-63 gsm
64-80 gsm
81-90 gsm
91-105 gsm
106-128 gsm
129-150 gsm
151-176 gsm
177-220 gsm
221-256 gsm
256-300 gsm
301-350 gsm
Coated 52-105 gsm
106-128 gsm
129-150 gsm
151-176 gsm
177-220 gsm
221-256 gsm
256-300 gsm
301-350 gsm
Interposer
The Standard Finisher includes a standard Interposer (also called a Post-Process Inserter), used to insert preprinted stock into finished sets
without having to go through the engine. This tray, on the Press Control Panel is called Tray T1 (on some products it is Tray 8).
NOTE:
Labels, coated media, and envelopes are not supported.
Interposer Capacity by weight and paper finish
Paper type and weight
Uncoated 52-80 gsm
81-220 gsm
Hole Punching
The Standard Finisher offers Hole Punching as a standard feature.
 Holes are created on the trail edge of the sheet.
 Hole punch capacity is equal to the regular capacity of the chosen output tray.
 For the USA, 2- and 3-hole punching is available; for Europe, 2- and 4- hole punch is available.
 Stacks can be punched on the left or right side, or on the top edge.
Customer Expectation & Installation Guide
Paper Size
B5 / A4 /
182 x 257 8.5 x 11 in
mm
1,500 3,000
H=180 mm H=378 mm
(7.09 in) (14.88 in)
H=180 mm H=378 mm
(7.09 in) (14.88 in)
B5 / 7.25 x 10.5 in
100
100
up to 100
50
30
19
12
5
4
3
Not supported
Not supported
5
5
5
5
4
3
Not supported
B5 / 8 x 10 in
200 sheets
H=22 mm (0.87 in)
B4 / A3 /
8.5 x 14 in 11 x 17 in
1,500 1,500
H=180 H=180
mm (7.09 in) mm (7.09 in)
H=180 mm H=180 mm
(7.09 in) (7.09 in)
Paper Size
A4 / 8.5 x 11 in B4 / 8.5 x 14 in
100
100
up to 100
50
30
19
12
5
4
3
Not supported
Not supported
5
5
5
5
4
3
Not supported
Paper Size
A4 / 8.5 x 11 in B4 / 8.5 x 14 in
200 sheets
H=22 mm (0.87 in) H=22 mm (0.87 in)
12 x 18 in* SRA3*
1,500 1,500
H=180 H=180 mm
mm (7.09 in) (7.09 in)
H=180 mm H=180 mm
(7.09 in) (7.09 in)
A3 / 11 x 17 in
100
100
up to 100
50
30
19
12
5
4
3
Not supported Not supported
Not supported Not supported
5
5
5
5
4
3
Not supported Not supported
A3 / 11 x 17 in
200 sheets
H=22 mm (0.87 in)
13 x 19.2 in*
1,500
H=180 mm
(7.09 in)
H=180 mm
(7.09 in)
100
100
up to 100
50
30
19
12
5
4
3
5
5
5
5
4
3
200 sheets
25