Xerox Versant 80 Press Installation Manual page 20

Key Features and Considerations
The following features are available and operate per specification, unless otherwise noted in the customer documentation.
Feature Description
Common User
 An easy-to-use User Interface (GUI) that is
Interface
Pantoe & Pantone
 The FreeFlow Print Server and the print engine is a
Goe
 Tints and Highlights fine-tuned for better accuracy
 Duotone, Tri-tone and Quad-tone support
Concurrent processing
Job streaming
Calibration & Color
 Provide real time building and management of divice
Management
 Strong color management across the print floor
Page Level  Exception pages
Programming
 Selectively apply a variety of parameters at the page
 Add tabs and other unique pages to a job
 Includes ability to vary trapping, over print, image
Tabs
 Full Ordered Stock Support
 The ability to recognized a jam on tabs and purge the
Queues / Virtual Printers /
 Multiple independent queues
Hot Folders
 Apply programming parameters via queue for
 Up to 250 queues allowed
 Hot Folder support for job submission
Page and Object Color paths can be changed on a page and object type
Level Adjustments basis
Job Accounting
 Captures job related characteristics for display and/or
Sample Print
 Request an additional set every N sets to be printed
 Print sample one or more sheets at N sheet intervals in
Setpagedevice
 Dynamic media pulls
 Recognizes this PostScript command for any stock
Disk Overwrite
Overwrite tool see
Customer Expectation & Installation Guide
customizable to meet the clients most common actions
Pantone Licensed solution
links between source and output profiles (this
sometimes is referred as a four to four process)
level in addition to queue and job programming
shift, simplex / duplex, print as a grayscale, edge
enhancement, and stock selections on a page basis
set and reprint a complete set with the proper tab
order
workflow automation
export
and set to the press top tray
the job or one or more sheets at any point in every N
sets vs. the entire set
related parameter to enable mixed stock jobs
Security section
Comments
Common across Xerox engines running FreeFlow print
Server 9.0
Libraries licensed by Pantone
 Streamed jobs cannot be interrupted
 All jobs begin printing while still being RIPped when
programmed 1-N
 When using the ILS for calibration or profiling, use the
following stock sizes: 8.5 x 11 LEF, 8.5 x 14 LEF, 11 x
17, 12 x 18 or A4 LEF
 When using the scanner for calibration use only 8.5 x
11 LEF or A4 LEF
 Enables mixed media jobs
 Independent side 1 / side 2 image shift
 Mix single and double sided pages
 Each page will be rendered per the profile associated
with the media selected for that page
 Anti-aliasing cannot be applied on a page or object
basis
 128 queues with AppleTalk
If a substantial amounts of changes are necessary it is
always best to rework original file then try and manage at
press
Data captured includes Job ID, container ID, host job
number, sender name, recipient, account, disposition job
status, virtual printer, printer type, job submission date,
input file size, PDL format, start & stop RIP time, elapsed
RIP time, number pages RIPped, total pages trapped,
print start and complete, copies printed, finishing
applied, black page count, color page count, anti-alias
page count, stocks used (weight, size, etc., for each)
There may be a pitch delay between the stacker and the
top tray
Versant 80 Press