C-Z Folder; Squarefold Trimmer Module - Xerox Versant 80 Press Installation Manual

Versant 80 Press

C-Z Folder

The C/Z Folder is available with these finishing devices:

Standard Finisher

Booklet Maker Finisher

Standard Finisher Plus
C/Z Folder
The C/Z Folder unit produces Tri-C fold, Z-fold, and Z-Fold half-sheet.
 The C/Z folding tray accommodates 30 sheets of up to 24 lb. (64-90 gsm) uncoated media
 Supported Paper size is 8.5 x 11 in (A4) to the bottom tray; 11 x 17 in (B4 and A3) to the top tray
 Fold types, accuracy, and supported paper sizes are shown in the following table:
Z-Fold Half-Sheet Also known
as:
 Engineering Z-Fold
 Accordion Fold
 Accordion Fold-out
C-Fold Also known as:
 Letter Fold
 Tri-fold
 Envelope Fold
Z-Fold Also known as:
 Accordion Fold
 Concordia Fold

SquareFold Trimmer Module

The SquareFold Trimmer is an optional finishing device that flattens the spine of a booklet and performs face trim of the booklet.
IMPORTANT: It is available with the Booklet Maker Finisher; it is not available with any other finishing device. For information related to the
SquareFold Trimmer Module, refer to Module Dimensions for Optional Devices and Electrical Requirements for Optional Devices.
SquareFold Trimmer Module
SquareFold Trimmer
Specifications
Configuration
Auto Recognition of the
SquareFold Trimmer Module
Customer Expectation & Installation Guide
Feature
Paper Types and Weights
Paper Size
Trim Capacity
Trim Dimensions
This equipment is located after the Booklet Maker Finisher, and the operation is as follows:
 Receives the booklet from the booklet maker unit
 Transports the received booklet to the square-fold unit to flatten the spine of the booklet and then to the
trimmer unit to trim the face of the booklet
 Deposits the finished booklet into the booklet tray.
The SquareFold Trimmer Module is also able to face-trim without square-folding. All output from the Booklet
Maker Finisher can be passed through, square-folded, trimmed, or both squared-folded and trimmed, including
custom sizes from 210 x 297.4 mm-330.2 x 457.2 mm (SEF Letter through 13 x 18 in).
When the SquareFold Trimmer Module is docked to the Booklet Maker Finisher via cable, the finisher
automatically recognizes that the SquareFold Trimmer is installed.
Produces folded output ½ size of original:
 B4 -> B5
 A3 -> A4
 11 x 17 in -> 8½ x 11 in
Produces folded output 1/3 size of original.
For stock sizes:
 A4**
 8½ x 11 in **
** Delivered to Envelope Folder
Produces folded output 1/3 size of original.
For stock sizes:
 A4**
 8½ x 11 in **
** Delivered to Envelope Folder Tray
Specification (with centerline paper)
52-350 gsm, Coated and Uncoated (18 lb. Bond - 110 lb. Cover)
Minimum: 8.5 x 11 in SEF (216 mm x 279 mm)
Maximum: 13 x 18 in SEF (330 mm x 457 mm)
520 sheets (90 gsm/24 lb.)
525 sheets (80 gsm/20 lb.)
2 mm-20 mm, adjustable in 0.1 mm increments
27