Xerox Versant 80 Press Installation Manual page 30

Hole Punch Capacity by weight and paper finish
Paper type and weight
Uncoated 52-220 gsm
Coated 106-220 gsm
Standard Finisher Limitations
Booklet Maker Finisher
The Booklet Maker Finisher is a separate configuration that adds basic booklet making capability to all the same features as the Standard
Finisher. The Booklet Maker Finisher includes:
 Hole Punch
 Stapler
 Top Tray
 Stacker Tray
 Booklet Unit capable of saddle stapling and bi-folding
NOTE: Hole punching is not available to the Booklet Tray
Booklet Maker Finisher
Booklet Maker Finisher
Specifications
Booklet Capabilities by Weight and Paper Finish
Sheets per booklet by weight and paper finish
Paper type and weight
Uncoated 52-80 gsm
81-90 gsm
91-105 gsm
106-128 gsm
129-150 gsm
151-176 gsm
177-220 gsm
221-256 gsm
257-350 gsm
Coated 106-128 gsm
129-150 gsm
151-176 gsm
177-220 gsm
221-256 gsm
257-350 gsm
Fold Accuracy of the Inner Sheet
(Lead and Side Edges)
Bi-Fold Capability
Paper type and weight
Uncoated 52-350 gsm
Coated 106-350 gsm
Fold Accuracy of Bi-Fold
(Lead and Side Edges)
Booklet Marker Finisher
Limitations
Customer Expectation & Installation Guide
B5
Applicable
Applicable
Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the Stacker
Tray, due to the press being forced to wait while each single sheet set is ejected to the Stacker Tray.
For specifications on the Top Tray, Stacker Tray, Stapling, Hole Punching, and the Interposer refer to Standard Finisher
Specifications. The following provides specifications on the Booklet Maker.
A4 / 8.5 x 11 in B4 / 8.5 x 14 in
25
20
10
10
10
10
5
4
3
10
10
10
5
4
3
• Stapled: ≤1.5 mm for A4 sheets, ≤2.0 mm for other sizes
• Non-stapled: ≤1.5 mm
Bi-Fold (Single Fold) **Capability by weight, size and paper finish
A4 / 8.5 x 11 in B4/8.5 x 14 in
1
1
Fold accuracy (lead and side edge): ≤2.5 mm
•
Bi-Fold: 1 sheet/set, 64-300 gsm uncoated stock, 106-300 gsm coated stock
Productivity may be reduced by up to 50% when running multiple sets of a single sheet job to the
•
Stacker Tray.
Higher jam rates may occur when running 280 gsm and above, tabloid sheets to the Booklet Maker.
•
After cancelling a job sent to the Booklet Maker, empty the purge tray before submitting another print
•
job. This will ensure that purged sheets are not inadvertently inserted into the next booklet printed.
Paper Size
A4 / 8.5 x 11 in B4 / 8.5 x 14 in
Applicable
Applicable
Paper Size
A3 / 11 x 17 in
25 25
20 20
10 10
10 10
10 10
10 10
5 5
4 4
3 3
10 10
10 10
10 10
5 5
4 4
3 3
A3/11 x 17 in
1 1
1 1
Versant 80 Press
A3 / 11 x 17 in
Applicable Applicable
Applicable Applicable
12 x 18 in
25
20
10
10
10
10
5
4
3
10
10
10
5
4
3
12 x 18 in
1
1
SRA3
25
20
10
10
10
10
5
4
3
10
10
10
5
4
3
SRA3
1
1