Line Status; Line Status Indicators - Cisco 8811 User Manual

Line Status

Step 2 Hang up the call on your mobile phone to disconnect the mobile phone, but not the call.
Step 3
Press Answer on your desk phone within 10 seconds and start talking on the desk phone.
For more information, contact your system administrator. The Cisco Unified devices that share the same line
display a Remote In Use message.

Line Status

Line Status indicators allow you to view the state of a phone line that is associated with a speed-dial button.
Your system administrator sets up Line Status indicators on your phone.

Line Status Indicators

Line Status indicators show the state of a line.
Icon
Line Status indicators can be set up on speed-dial buttons by your system administrator and can be used with
these features:
Speed Dial
Directed Call Park
Call Pickup
Your system administrator can also set up your phone to play an audible alert when a call rings on the monitored
line.
Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager
10.5
72
Allows you to monitor the status of (and dial) a specific number on a speed-dial button. If the monitored
line is unavailable, the Line Status button changes to a normal speed-dial button.
Allows you to monitor the line status of and dial a Directed Call Park number on a speed-dial button.
Allows you to monitor the line status of (and pick up a ringing call on) a ringing call on a
speed-dial button.
Indicator
Line is in use.
Line is idle.
Line is ringing. (Only for Call Pickup.)
Line is in a Do Not Disturb (DND) state.
Advanced Calling Features