Place A Mobile Call; Move A Call Between The Ip Phone And A Mobile Phone; Adjust The Mobile Device Volume; Mobile Contacts And Mobile Call History Sharing - Cisco 8811 User Manual

Advanced Calling Features

Place a Mobile Call

Procedure
Step 1
Select a mobile line.
Step 2 Enter a ten digit number or select a contact from the call history.
Step 3 Press Call.

Move a Call Between the IP Phone and a Mobile Phone

Use your Cisco IP Phone to move an active call to or from your mobile device.
Procedure
Step 1
To move the call from your Cisco IP Phone to your mobile device, select Move audio.
Step 2 To move the call from your mobile device to your Cisco IP Phone, select Move audio.

Adjust the Mobile Device Volume

Volume controls on your Cisco IP Phone and mobile device are synchronized. Synchronization only occurs
when there is an active call.
Procedure
While on a call, adjust the volume on either the desk phone or on your mobile device to adjust the mobile
device volume.

Mobile Contacts and Mobile Call History Sharing

A paired mobile device displays in Bluetooth > Accounts as Bluetooth. This account remains until the
mobile device is unpaired.
Mobile Contacts can be checked from the Recents menu on the IP phone; Mobile Call History sharing can
be found using the New Call softkey.
Cisco IP Phone 8811, 8841, and 8851NR do not support Bluetooth or Mobile Contacts and Mobile Call
Note
History Sharing.
Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager 10.5
Place a Mobile Call
83