Power Save And Power Save Plus; Power Save; Power Save Plus - Cisco 8811 User Manual

Getting Started
17
18
19

Power Save and Power Save Plus

There are two levels of energy-saving modes that your system administrator can set up:
• Power Save: Backlight turns off when not in use for a period of time, reducing the power requirements.
• Power Save Plus: The phone display goes blank, turning the phone off and on at predetermined times.

Power Save

Depending on how your system administrator set up your phone, the phone display may go into a power-save
mode (the phone screen appears blank and the Select button is lit white).
To turn on the phone display, press any button or pick up the handset.

Power Save Plus

Your phone supports the Cisco EnergyWise (EW) program, also known as Power Save Plus. Your system
administrator sets up sleep (power down) and wake (power up) times for your phone to save energy. If your
phone goes into the Power Save Plus mode, the Select button is lit white.
Ten minutes before the scheduled sleep time, the Select button lights up and you receive a message that your
phone will power off at a specific time. If enabled by your system administrator, you also hear your ringtone
play. The ringtone plays according to the following schedule:
• At 10 minutes before power off, the ringtone plays four times
• At 7 minutes before power off, the ringtone plays four times
• At 4 minutes before power off, the ringtone plays four times
• At 30 seconds before power off, the ring tone plays 15 times or until the phone powers off
Messages button
Back button
Handset
The power to the phone is significantly reduced.
Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager 10.5
Autodials your voice messaging system (varies by system).
Returns to the previous screen or menu.
Phone handset.
Power Save and Power Save Plus
21